How to pair Skullcandy Wireless Earbuds | Earmania

How to pair Skullcandy Wireless Earbuds And FAQ

Let learn how to pair Skullcandy Wireless Earbuds. What are Skullcandy earbuds? Have you ever heard of them before? The finest noise-canceling headphones have been more popular in recent years. Assuming you already have a set of Skullcandy wireless earphones, let’s get started with How to pair Skullcandy Wireless Earbuds And FAQ.

Currently, smartphone manufacturers are increasingly removing the headphone port, which has unintentionally encouraged the usage of Bluetooth headphones. Skull candy has a significant edge in this regard, to say the least. It might be difficult to figure out how to pair Skullcandy wireless earbuds to your smartphone. For this reason, Through this post, Earmania will make an attempt to walk you through the pairing procedure. And learn how to pair Skullcandy Wireless Earbuds. Come on, let’s go to work on finding the solution of Skullcandy Bluetooth earbuds how to pair right now!

How to pair Skullcandy Wireless Earbuds And FAQ

The first thing you want to do is make sure that the earbuds are charged. The Skullcandy wireless earbuds come with a micro-USB cable, which you can use to charge them. Once they are fully charged, you want to turn them on by pressing and holding the power button for a few seconds until you see the LED light blinking blue. Now it’s time to find your Bluetooth settings.

On an iPhone, go to Settings -> Bluetooth -> and then turn on “Bluetooth.” You should see your device name appear under “Available Devices.” Tap on it and it will bring up a six-digit code.

R 1

You will then see the headphones blinking different colors as they try to pair with your device. Once pairing starts, you’ll have a few seconds to go into the Bluetooth settings on your phone and press “Pair.” If everything worked correctly, you should hear a voice prompt saying that it has successfully been paired with your smartphone.

Non-Apple Device

How to pair Skullcandy Wireless Earbuds And FAQ if you’re using a non-Apple device , follow these steps:

  • First of all, turn on the Bluetooth functionality in your phone or tablet.
  • Once the earphones are fully charged, press and hold the power button for about five seconds until you see a little LED blue light start blinking rapidly. This means they are in pairing mode now.
  • Make sure no other devices nearby are paired with Skullcandy headphones – turn off any nearby Bluetooth headsets if necessary (the Liger would be nice here).
  • Open your device’s Settings menu, locate the Bluetooth section, and tap on it. You should see a list of devices that are currently paired with your phone. Near the top of this list, you’ll see an entry for the “S Earbuds” – tap on it to begin the pairing process.
  • If you’re successful, you should see a message like “Paired” and hear a voice prompt saying that Skullcandy headphones have been connected.

If all goes according to plan, you now have a set of working wireless headphones! The next time you want to use them, just turn them on by pressing and holding the power button until you see the blue light blinking. They will automatically connect to your previously-paired phone, as long as it has Bluetooth turned on.

Checkout This Video If You are having pairing problem:


In the event that you have difficulties while attempting to connect your headphones, the procedures listed below should assist you in resolving the issue.

  • Place your headphones in the charging case to keep them charged.
  • Make sure that the model number of your headset is no longer shown in the list on your mobile phone or computer.
  • Turn off the Bluetooth function on your mobile phone or personal computer.
  • Remove your right earbud from the casing and plug it in to turn it on. At this moment, it will not be linked to the network at all.
  • Continue by powering down and resetting your headset. When the light on the headset changes from green to red, you have achieved success. If this is not the case, repeat step 5 until the light becomes red. Place the right earbud back in its carrying case and close the case.
  • Then repeat the procedure with the left earbud. (4th and 5th steps)
  • As you begin to remove both headphones from their packaging, the headphones will instantly turn on and begin connecting with one another.
  • You will hear a beep at the end of the sentence. When this happens, it indicates that the buds have formed a bond with one another. When it is ready to “Pair,” you will hear a voice prompt telling you that it is ready. That indicates that it is searching for your device.
  • Finally, re-enable the Bluetooth mode on your smartphone in order to reconnect with the headset.

There are many reasons why this may be the case. Firstly, check that your earphones are actually in pairing mode – this can usually be done via the earphone’s settings menu, accessed by pressing a button or two on the earpiece. Secondly, make sure that your phone’s Bluetooth function is activated and that your phone is within range of the earphones. Finally, try restarting your phone and earphones. If all else fails, consult the skull candy troubleshooting guide or contact customer service.

There are a few things you can check if you’re not getting any sound from your skull candy earphones. Firstly, make sure that the volume is turned up on both your phone and earphones. Secondly, if you’re using an Android phone, make sure that Dolby Digital Plus is enabled in the audio settings menu. Finally, try resetting your skull candy earphones by pressing and holding the power button for five seconds.

This is probably just an issue with the audio settings on your device. Try adjusting the volume or changing the audio mode on your phone or tablet. If that doesn’t work, you might need to switch earbuds.

There are a few reasons why this might happen: 1) Your earbuds might be low on battery; 2) The environment you’re in might have too much noise interference; 3) You might be using the incorrect audio settings. Try adjusting the volume or changing the audio mode on your phone or tablet. If that doesn’t work, you might need to switch earbuds.

There are a few reasons why this might happen: 1) You might be trying to pair your earbuds with the wrong device; 2) Your phone or tablet’s Bluetooth functionality might be turned off; 3) Your phone or tablet doesn’t have enough available memory for additional Bluetooth devices. Try closing any apps that may be using a lot of memory and try again. If all else fails, restart your phone or tablet entirely and try pairing them again from scratch. If you are having trouble please read our How to pair Skullcandy Wireless Earbuds And FAQ blog again.

Some owners of the Skullcandy wireless earbuds have complained about connectivity problems. In most cases, this is caused by something as simple as the earbuds not being tightly fitted into your ears – try adjusting them until they are snug. If that doesn’t work, you might want to make sure that your device’s Bluetooth software is up to date and try again. If you’re still having trouble, contact Skullcandy’s customer service team for more help.

That’s all for now – we hope this guide was helpful! If you have any other questions or run into any problems, be sure to leave a comment below and we’ll do our best to help out. Happy listening!

About The Auther

Share this post

Share on facebook
Share on twitter
Share on linkedin

You May Also Like